iMX6 Biometric Secured board
Based on the industry standard Quad core iMX6 from NXP, this very densely populated board is highly powerful in terms of processing power – 10,000 DMIPS.
It runs heavy duty applications based on divers biometric sensors while the ultimate goal is to be outmost secured. It designed to integrate with a smartphone case and communicates with the smartphone through a proprietary USB-Charging protocol.
- CPU – IMX6 Quad/Dual core. 1Ghz. 10,000/5,000 DMIPS.
- RTOS – embedded Linux
- RAM – 2GB DDR3
- NOR Flash – 512KB
- Storage – uSD
- Wireless comm. – WiFi, BLE.
- Wired comm. – USB OTG, USB Host x 2, UART, on-board SPI and I2C
- Sensors – MIPI camera, Parallel camera, IMU (accelerometer, gyro), Pulse oximeter
- Display – micro HDMI
- Smart USB-Charging circuit – charges its battery and the attached smartphone battery and also communicate with the smartphone at the same time.
- Secured – biometric sensors, secured boot, tampering protection and more.
- Power consumption – 4W for quad core. 3W for dual core.
- Operating temperature – -20 to +50 ◦
This board supports the product Secured smartphone case
iMX6 Avionic board
Another iMX6 board that developed lately by Electronic-Design. Among of its unique features, this extremely powerful avionic grade board supports QNX RTOS and a legacy 16bit general purpose multiplexed bus.
- CPU – IMX6 Quad/Dual core. 1Ghz. 10,000/5,000 DMIPS.
- RTOS – QNX
- RAM – 3GB DDR3
- NOR Flash – 16MB
- eMMC – 8GB
- Storage – uSD
- – GigaEthernet, USB OTG, USB Host, RS232/485×4, SPIx4 (20Mhz), I2Cx2.
- On-board SPI and I2C
- Legacy 16bit multiplexed bus for MIL-1553 and ARINC-429 modules control.
- FPGA
- Power consumption – 7.4W
- Operating temperature – -40 to +85 ◦
- EMC – MIL461 and MIL704
- Vibrations – 20 Grms
Medical related electronic board
A miniature and low power board for medical application. It uses a wireless charging battery and consumes only 10uA in sleep mode.
- Microcontroller – TI MSP430
- Four channels ECG (Electro Cardio Gram)
- World smallest Bluetooth – only 10x5mm including antenna.
- Wireless battery charger
- Power consumption – only 10uA in sleep mode
- Dimensions – 40×10 mm
OMAP board
This board uses a SOM (System On Module) with TI OMAP DSP processor to control an oven. The oven supports various controllable assemblies, such a heater, AC motor, vacuum pump.
- CPU – TI DM37 (DSP + ARM Cotrex8)
- RTOS – WIN-CE
- RAM – DDR2 256 MB
- microSD card
- LCD 720P
- Touch Panel
- Keypad controller
- Communications – GigaE, USBx4, RS232
- On-board SPI and I2C
- Audio
- Graphic & Video out – HDMI and NTSC
- 13 bit ADC for thermocouple measurement.
- Pressure sensor – Vacuum control
- IO expander
- Power consumption – 3W
- Operating temperature – 0 – 70 ◦C
DSP board
A military grade DSP board for video processing.
- DSP – TI DM6437 600Mhz
- Flash – 16MB
- Video In/Out – NTSC or PAL
- Communications – Ethernet, RS232
- Power consumption – 3W
- Operating temperature – -40 to +85 ◦C
- Environmental – MIL-810
- EMC – MIL-461
COMe carrier board
- COMexpress carrier board for military application.
- Fanless cooling – heat dissipate to the enclosure through a carefully designed heat spreader.
- CPU – Intel X86 processor
- PCIe and PCI bus
- Video decoder
- Graphic out – DVI and VGA
- Communications – GigaE, USBx4, RS232
- On-board SPI and I2C
- ADCx4 + DACx2
- Power consumption – 20W
- Operating temperature – -30 to +70 ◦C
- Environmental – MIL-810, vibrations 6G, shock 20G
- EMC – MIL-461
This board supports the product Mil-spec video projector